|
 |
|
            |
|
Log
Checker Project
Parts Listing
Parts Catalog |
|
2/1/2011-
Removed hood, lower splash panel,
AIR
pump, alternator, thermostat hsg, clearance lights, taillights, radiator
hold-down |
|
2/2/2011-Finished
Headlight Assemblies, Cleaned Alternator,
Cleaned Air stove/Paint, Cleaned Hood
Latch |
|
2/3/2011- Rebuilt Hood Lock, Safety Catch and
spring plunger-Installed on Latch Housing,
Rebuilt Alternator, Rebuilt License
Plate Light, Finished Radiator Hold down |
|
2/6/2011- Tail light housing, bumper guards, Turn
signal housings to plater. |
|
2/7/2011- Bead blasted air pump parts, t/s
reflectors, old diverter valve and License bracket- won jump seat cushions (ebay),
Finished Reverse Lights |
|
2/8/2011-
Removed both front fenders, radiator
cradle, radiator, water pump, fan, heater valve, & starter |
|
2/10/2011-Cleaned and rebuilt starter, installed
new terminal kit in alternator, cleaned and painted water pump and
thermostat housing,
repainted license light &
bracket,
cleaned and painted carbon
canister holder, cleaned canister |
|
2/12/2011-Cleaned and painted
AIR Pump pulley. Installed new diverter valve
(Volvo), installed carbon canister
bottom and filter |
|
2/15/2011-(Before)
Removed Upper and Lower Control Arms and
Passenger side coil spring. Removed
front pulley and timing cover. |
|
2/17/2011- Bead blasting continues- timing cover,
all front pulleys. Order tail-light refinishing kit |
|
2/20/2011- Bead Blasting fan. Cleaning A
frames-problem with lower control arm PS-uh-oh |
|
2/21/2011-
Finished removal of all suspension
components and bumper to frame brackets, removed manifolds and carb. |
|
2/22/2011- Removed air injection manifold,
master cylinder and power brake booster.
Cleaned firewall. |
|
2/23/2011- Cleaned first set of A-frames with
gasoline in preparation for the inaugural "soda blasting" |
|
2/25/2011-
Cleaned AIR manifold, began degreasing second set of A-frames (driver's side) |
|
2/26/2011- First use of
soda blaster-Cleaned
control arms (before)
(after), fan shroud
(before)
(after), radiator cradle
(before)
(after) Damage to
upper ball joint-passenger side |
|
2/27/2011- Removed Header pipe, picked up
re-plated parts (tail light housings, t/s housings, front bumper
guards)-beautiful job!, Cleaned front spindle and caliper assemblies |
|
2/28/2011- Had
new header pipe made, ordered
lower control arm from Arizona, suspension bumpers coming from PA, ordered
brake parts, dropped off radiator for repair and cleaning. Ordered brake
hoses |
|
|
|
 |
